Rgbhv Rgbs Rgb to Vga converter

XRGB BOX(Rgbhv Rgbs Rgb to Vga converter) is CRT Display Converter, used to convert various of RGB signals into VGA signals.

XRGB BOX(Rgbhv Rgbs Rgb to Vga Converter) is able to convert all Rgbhv Rgbs Rgb signal to VGA signal, and be connected with Liquid Crystal Display, CRT Display, Projection,LCD TV,Rear-Projector directly to achieve super hi-vision, distinct images and steady function, and replace your old or damaged display system. Nowadays XRGB BOX is used widely for various kinds of FHKD, such as Digital Control Machine Tool Display, DCS Display, injection molding machine, analytical instrument, Specialized Display of navigation and import production line, armamentarium, Specialized Display of airport, railway and financial facility, Special size Display, Specialized Display of imported PSP, Bowling and other recreational facilities, etc.  

Feature: automatic identification of sync signal and resolution ratio. 

 Supporting signal source: RGB SOG(green sync)

          RGB SOB(blue sync)

           RGB SOR(red sync)

           RGBS (compound sync)

           RGBHV(separate sync)

Supporting resolution ratio: 640*480

              800*600

               1024*768

               1280*1024

              1600*1200 etc.

2. Structure Chart of Product Interface:

   Annotation Interface Function Introduction:(as the chart below)

   DC12V: Power Input, direct-current 9-12V voltage, advised current above 1A.

   VGA OUT: Signal Output Interface, connected with Display.

   VIDEO IN 2: DB15 joint, signal input port.

VIDEO IN 1 5BNC: Signal input port, the same as VIDEO IN2.

K1: Switching Key, to reset and scan sync signal.

3. Installation

1. Introduction of Interface

Underneath panel: input interface of No.1 channel signal, 5 BNC in total, plus a switching key K1.

V: Field Synchronizing Signal

H: HSync, Compound Sync Signal 

R: Red Signal, red Sync Signal

G: Green Signal, Green Sync Signal

B: Blue Signal, blue Sync Signal

        K1: Synchro Resetting Key

Channel Interface Illustration, V H    R   G   B    K1 (panel silk-screen)

When the signal source is RGB(SOG Green Sync Signal, SOR red Sync Signal, SOB blue Sync Signal)three signals, connect R,G,B these three BNC, one-one correspondence.

When the signal source is RGBS(CS compound sync), connect H/CS,R,G,B these four BNC,one-one correspondence.

When the signal source is RGBHV(separate sync)connect V,H,R,G,B these five BNC,one-one correspondence.

   Top Panel: signal input interface of No.2 channel & VGA output port. Definition of VGA in is as below:

4. Schematic Diagram of Connection

1,Connect up the signal source, input signal.

2,Connect up the Display.

3,Plug in, then the system will identify automatically. If fail to identify, press K1 to reset.

5. Technical Parameters

   Power: DV12V,9-1 direct-current, advised current above 1A

   Input the video signal: support RsGB, RGsB, RGBs, RGBCS, RGBHV, VGA and etc.

          Support 640*480, 800*600, 1024*768, 1280*1024, 1600*1200 and etc.

          Signal peak value: 1.5Vpp

          Impedance: 75Ω

Electrical Level: 0.75-3.5

Signal Output:

Interface: VGA

  Resolution ratio: 640*480,800*600, 1024*768, 1280*1024, 1600*1200 and etc.

  Refresh rate: 50-120HZ

Medical equipment display, CT display, digital subtraction system monitors, radar system display, display B-ship radar displays, medical equipment, airport, railway, finance equipment, special displays, navigation equipment, special displays

Note: 1.YPbPr = YUV  2.Input Horizontal Frequency Rate 31kHz and above automatically recognized

Supported input signals:

RGB SOG (green sync) RGB SOB (blue sync) RGB SOR (red sync) RGBS (composite sync) RGBHV (sync separation)

Supported input resolutions: 640 * 480 800 * 600 1024 * 768 1280 * 1024 1600 * 1200, etc.

Rgbhv Rgbs Rgb to Vga converter